Dovpo Armour Squonk Kit

The Dovpo Armour Squonk Kit is the latest creation from Bruce (maker of the Bushido RDA) and DOVPO.

Powered by 2 x 18650 battery in parallel, it supports coils in the range 0.09Ω to 3.50Ω

Depending on the capability of your batteries, the wattage can go up to 130W.

Although this is a mechanical squonk mod, the Dovpo Armour Squonk Kit has a built-in board featuring multiple protections, including 10 second cut-off, short circuit protection and reverse battery protection.

Less than 10ms firing speed, and dual battery installed, the experience you will get form this kit is beyond your imagination!

Dovpo Armour Squonk Kit Operation & Functions:

1.Turn on/off
Move the toggle to switch the device on/off.

2.LED Indicator
Red: V≤3.6v, Yellow: 3.6v<V≤3.85v, Green: V>3.85v

3.Overtime Protection
The device will stop firing after 10s of continuous vaping, LED indicator will flash 8 times.

4.Short Circuit Protection
If a short circuit happens, LED indicator will flash 5 times in red.

5.Over Temperature Protection
When temperature of the board is over 75°C, LED indicator will flash 5 times in yellow. Protection lasts 15 seconds.

6.Low Battery Protection
1) When voltage gets lower than 3.2v, LED indicator will flash 10 times in red.
2) When voltage of either one or both batteries drop below 2.8v during vaping, LED indicator will flash 10 times in red.

7.Reverse Battery Protection

Dovpo Armour Squonk Mod Specs

Size: 44.0mm x 45.5mm x 82.5mm

Material: Anodised Aluminium

Working Voltage: 3.2v – 4.2v

Resistance Range: 0.09Ω – 3.50Ω

Quiescent Current: 30μA when turned off, 50μA when stand by

Battery: 2 x 18650 High-drain Battery in Parallel

Dovpo Armour RDA Specs

510 threading connection

Removable wide bore drip tip

Dual posts for single coil build

Airflow control

Deep juice well

Dovpo Armour Squonk Kit Includes:

Dovpo Armour Squonker Mod

Armour RDA

Solid Positive Pin

Spare O-rings

Spare Screws

User Manual