Coilology SS316L Round Wire

Coilology SS316L Round Wire is perfect for anyone who likes to build their own coils for their RTA, RDA or RDTA.

Coming in 30 foot (9.14 meter) spools of 24, 26, 27 or 28g, this wire is perfect for making simple coils when used on its own, but the Coilology SS316L Round Wire can also be used as a component to create more complex wires.

Perfect for use in Wattage mode, Coilology SS316L Round Wire is equally happy being used in temperature control set-ups.

As a general guide, for a SS316L coil with an internal diameter of 3mm and 5mm leg lengths the 24g with 4 wraps will give you a 0.2 Ohm coil. The 26g with 5 wraps will give you approximately 0.4 Ohm. The 27g with 6 wraps approximately 0.55 Ohm and the 28g with 6 wraps approximately 0.7 Ohm, so you have plenty of choice to make DTL, RDTL or even MTL coils depending on the wire and size of your coil.

Those are all approximations, check out Steam Engine's coil calculator and always test your coils before vaping with them.

With 30 foot of wire on each spool there is the potential to make anywhere between 120 and 180 coils from a single spool!

Coilology SS316L Round Wire Features:

Available in a range of gauges

30ft spool

Suitable for Wattage or Temperature Control modes

Use on its own or as a component in more complex wires

What's on the Spool:

30ft Coilology SS316L Round Wire

Warning:

Coilology SS316L Round Wire is intended for EXPERIENCED users only.

Coil resistances may vary slightly depending on the RDA/RTA and how accurately the mod reads the coils. Length of the leads go in to post holes will effect the resistance as well.

Knowledge on battery safety and ohms law is strongly recommended. Use at your own risk. Coilology Co. Limited and retailers are NOT responsible for injury or damage caused to property or person due to misuse of our product.